Preheating Cartridges & Sealants in Winter

Last updated: November 15, 2026

As soon as ambient temperatures on construction sites or in unheated assembly halls drop below 10 to 15 °C, dispensing sealants and adhesives from cartridges or foil bags becomes a struggle: the material stiffens, requires excessive force to extrude, and wets substrates poorly.

A professional Cartridge Heater (or Foil Bag Heater for 600 ml sausage packs) solves this problem at the root by bringing the material to its ideal application temperature.


1. Why Do Silicone, PU, and MS Polymer Stiffen in Cold Weather?

Almost all 1K and 2K sealants and adhesives—including silicone, acrylic, MS polymers (hybrid sealants), polyurethane (PU), as well as windshield and construction adhesives—exhibit strongly temperature-dependent viscosity:

  • Exponential Viscosity Increase: When material temperature drops from +20 °C to +5 °C, the dynamic viscosity of many sealants increases by a factor of 3 to 6.
  • High Dispensing Force: Manual caulking guns require immense physical effort; battery and pneumatic guns suffer high battery drain, mechanical wear, and slow extrusion speeds.
  • Poor Substrate Wetting (“Wet-Out”): Cold, high-viscosity adhesive cannot penetrate the micropores of the substrate, increasing the risk of adhesion failure.

2. What Does Preheating in a Cartridge Heater Achieve?

Technical data sheets from leading adhesive and sealant manufacturers almost universally recommend a material temperature between +15 °C and +35 °C (and up to +50 °C to +65 °C for high-viscosity structural or windshield adhesives).

Using a temperature-controlled Cartridge Heater delivers immediate benefits:

  1. Up to 70% Less Dispensing Effort: Preheated material flows smoothly and consistently through the nozzle.
  2. Clean, Uniform Bead Profile: No sputtering or uneven extrusion, making tooling and smoothing joints effortless.
  3. Reliable Adhesion in Winter: Reduced surface tension ensures immediate wetting of the substrate.
  4. Continuous Workflow with Dual Chambers: While the first 310 ml cartridge is being applied, the second is already heating up inside the device.

3. Why Improvised Heating Methods (Water Baths, Fan Heaters) Are Risky

On job sites, workers often try to warm cold cartridges in hot water buckets, on radiators, or in front of space heaters. These improvised methods carry serious risks:

  • Moisture Contamination: For moisture-curing systems (PU, MS polymer, silicone), water baths can trigger premature curing or bubble formation.
  • Localized Overheating: Uncontrolled heat sources overheat the outer plastic cartridge wall while the core stays cold—potentially warping the cartridge or damaging the chemical binder.

The Safe Alternative: Radial PTC Heating & EPP Insulation

Neybo preheaters combine individual radial heaters with intrinsically safe PTC heating elements (Tmax 65 °C) inside a break-proof, highly insulated EPP housing:

  • Cartridge Heater (2 × 310 ml): Compact dual-chamber preheater (only 1.0 kg) with shoulder strap and digital temperature control up to 65 °C.
  • Foil Bag Heater (4 × 600 ml): Designed for simultaneous preheating of four 600 ml foil bags in facade, window, and industrial applications.
  • Heatbox (Universal): Ideal for mixed containers, cans, buckets, or larger batches of cartridges and foil bags.

Thanks to full expanded polypropylene (EPP) thermal insulation, heat stays locked inside for a long time even when unplugged at the point of use (e.g. on scaffolding or aerial work platforms).